DALÉRO H & I

Parameter of Pultrusion Profiles
Property Direction Unit Test Method Profiles
Tensile Strength LW MPa ASTM D638 /GB1447-83 210-350
CW MPa 30-60
Tensile Modules LW GPa ASTM D638 /GB1447-83 15-28
CW GPa 5-7
Flexural Strength LW MPa ASTM D790 /GB1449-83 210-390
CW MPa 60-100
Flexural Modulus LW GPa ASTM D790/ GB1449-83 15-24
CW GPa 5-7
Compressive strength LW MPa ASTM D695 /GB1448-83 16-23
CW MPa 5-10
Short beam shearing strength LW MPa ASTM D2344 22-35
Impact strength LW KJ/m2 ASTM D256 150-250
Barcol hardness ASTM D2583 40-50
Relative density g/cm2 ASTM D792 1.7-1.9

LW=lengthwise      CW=crosswise

Standard Dimensions
Code Dimension (mm)

AxBxT

DI50S 50.8×50.8×4.2
DI50L 50.8×50.8×6.35
DI76 76.2×76.2×6.35
DI101 101.6×101.6×6.35
DI152 152.4×76.2×6.35
DHI52 152.4×152.4×9.5
DI202 202×101.6×10
DH203 203.2×203.2×12.7
DI250 250x125x12
Parameter of Pultrusion Profiles
Open PDF
Standard Dimensions
Code Dimension (mm)

AxBxT

DI50S 50.8×50.8×4.2
DI50L 50.8×50.8×6.35
DI76 76.2×76.2×6.35
DI101 101.6×101.6×6.35
DI152 152.4×76.2×6.35
DHI52 152.4×152.4×9.5
DI202 202×101.6×10
DH203 203.2×203.2×12.7
DI250 250x125x12
Questions? Or do you want to receive more information?